Useful EMDrive Design and Test Tools

From EM Drive
Revision as of 06:59, 24 August 2015 by Saucyjack (talk | contribs) (Roger Shawyer's EMDrive Design: Added link to earlier spreadsheet version)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Simulations

See details of using MEEP for simulations.

Roger Shawyer's EMDrive Design

TheTraveller's EMDrive design spreadsheet, developed in cooperation with Roger Shawyer, last updated 8/11/15. Earlier 6/17/15 version available here.

How to use the spreadsheet.png


  • Testing an EMDrive [1]

Shawyer claims to have successfully measured EMDrive thrust by:

1) Using a scale directly under or offset to one side of the EMDrive.

ShawyerOffsetScale.jpg


2) Using an overhead spring to offset some of the EMDrive weight on a scale under the EmDrive.

ShawyerSpringOverAScale.jpg


3) Using a knife edge Teeter Totter Balance Beam.

ShawyerBalanceBeam.jpg


4) Using a rotary air bearing setup to directly measure acceleration and deceleration.

ShawyerRotaryTestRig.jpg

None of Shawyer's publications have been ever published in peer-reviewed journals. What Shawyer claims to be EM Drive force measurements could be the result of experimental artifacts. According to the scientific method, replication of his experiments need to be performed at many scientific institutions to confirm or nullify his claims.

References