Difference between revisions of "Generic EM Drive Information"

From EM Drive
Jump to: navigation, search
m (Additional calculations and source.)
(Velocity: Added in a section about Kinetic Energy.)
Line 4: Line 4:
  
 
At constant input power, the thrust, and therefore the acceleration, must decrease with time, to ensure that the spacecraft's (change in) velocity never exceeds 2*Power/Thrust.<ref>[http://forum.nasaspaceflight.com/index.php?topic=36313.msg1314503#msg1314503 Rodal's post concerning the energy/thrust constraint.]</ref> Effectively, White proposes that the maximum velocity possibly achievable for these EM Drives is 2*PowerInput/ThrustForce. This energy constraint is known even from Sutton's textbook on Elements of Rocket Propulsion (equation 19-1 Rocket propulsion elements 7th edition- Sutton).
 
At constant input power, the thrust, and therefore the acceleration, must decrease with time, to ensure that the spacecraft's (change in) velocity never exceeds 2*Power/Thrust.<ref>[http://forum.nasaspaceflight.com/index.php?topic=36313.msg1314503#msg1314503 Rodal's post concerning the energy/thrust constraint.]</ref> Effectively, White proposes that the maximum velocity possibly achievable for these EM Drives is 2*PowerInput/ThrustForce. This energy constraint is known even from Sutton's textbook on Elements of Rocket Propulsion (equation 19-1 Rocket propulsion elements 7th edition- Sutton).
 
  
 
The higher the ThrustForce/InputPower, the lower the maximum velocity of an EM Drive: MAXIMUM VELOCITY OF EM DRIVE = 2 /(thrustForce/PowerInput)
 
The higher the ThrustForce/InputPower, the lower the maximum velocity of an EM Drive: MAXIMUM VELOCITY OF EM DRIVE = 2 /(thrustForce/PowerInput)
Line 15: Line 14:
 
#MAXIMUM VELOCITY OF EM DRIVE ~ (2 /(Q*otherParameters))
 
#MAXIMUM VELOCITY OF EM DRIVE ~ (2 /(Q*otherParameters))
  
 
+
== Kinetic Energy ==
 +
The frame-of-reference kinetic energy issues (for non-relativistic spacecraft speeds) are eliminated by the definition of constant acceleration as acceleration=(delta velocity)/(delta time) so that (delta velocity)=acceleration*(delta time).<ref>[http://forum.nasaspaceflight.com/index.php?topic=36313.msg1315154#msg1315154 Rodal's Post on Changing Kinetic Energy.]</ref> Since from Newton's 2nd law, acceleration=ThrustForce/Mass, the change in velocity is uniquely defined in terms of: ThrustForce, total Mass of the spacecraft and DeltaTime (regardless of velocity-frame-of-reference) directly as (delta velocity)=(ThrustForce/Mass)*(delta time). The intrinsic definition of the change in KineticEnergy of the spacecraft under constant acceleration:
 +
*deltaKineticEnergy = (1/2)*Mass*((delta velocity)^2)
 +
*deltaKineticEnergy = (1/2)*Mass*([(ThrustForce/Mass)*(delta time) ]^2)
  
 
== References ==
 
== References ==
 
<references />
 
<references />

Revision as of 12:43, 14 May 2015

This is a location for assorted information concerning EM Drives. Likely applies to all current experimental efforts.

Velocity

At constant input power, the thrust, and therefore the acceleration, must decrease with time, to ensure that the spacecraft's (change in) velocity never exceeds 2*Power/Thrust.[1] Effectively, White proposes that the maximum velocity possibly achievable for these EM Drives is 2*PowerInput/ThrustForce. This energy constraint is known even from Sutton's textbook on Elements of Rocket Propulsion (equation 19-1 Rocket propulsion elements 7th edition- Sutton).

The higher the ThrustForce/InputPower, the lower the maximum velocity of an EM Drive: MAXIMUM VELOCITY OF EM DRIVE = 2 /(thrustForce/PowerInput)

  1. (Brady TE mode) ThrustForce/power: 0.00002131 Newton/Watt --> MaximumVelocity = 2/0.00002131 m/s = 93853 m/s = 93.85 km/s
  2. (Prof. Juan Yang et.al. China) ThrustForce/power: 0.000290 Newton/Watt --> MaximumVelocity = 2/0.000290 m/s = 6897 m/s = 6.90 km/s
  3. (Cannae Superconducting) ThrustForce/power: 0.0009524 Newton/Watt --> MaximumVelocity = 2/0.0009524 m/s = 2100 m/s = 2.10 km/s

The maximum velocity of the EM Drive is inversely proportional to Q: [2] Therefor the higher the Q, the lower the maximum velocity.

  1. MAXIMUM VELOCITY OF EM DRIVE = 2 /(thrustForce/PowerInput)
  2. MAXIMUM VELOCITY OF EM DRIVE ~ (2 /(Q*otherParameters))

Kinetic Energy

The frame-of-reference kinetic energy issues (for non-relativistic spacecraft speeds) are eliminated by the definition of constant acceleration as acceleration=(delta velocity)/(delta time) so that (delta velocity)=acceleration*(delta time).[3] Since from Newton's 2nd law, acceleration=ThrustForce/Mass, the change in velocity is uniquely defined in terms of: ThrustForce, total Mass of the spacecraft and DeltaTime (regardless of velocity-frame-of-reference) directly as (delta velocity)=(ThrustForce/Mass)*(delta time). The intrinsic definition of the change in KineticEnergy of the spacecraft under constant acceleration:

  • deltaKineticEnergy = (1/2)*Mass*((delta velocity)^2)
  • deltaKineticEnergy = (1/2)*Mass*([(ThrustForce/Mass)*(delta time) ]^2)

References