Difference between revisions of "List of Suggested Experiments"

From EM Drive
Jump to: navigation, search
Line 9: Line 9:
  
 
== Fustrum Material Variations ==
 
== Fustrum Material Variations ==
# Build small end plate out of [http://en.wikipedia.org/wiki/Permeability_%28electromagnetism%29#Values_for_some_common_materials Metglas] or a similar material with high magenetic permeability.<ref>[http://forum.nasaspaceflight.com/index.php?topic=37642.msg1381091#msg1381091  Forum post by Flyby] referencing earlier posts. Purpose: to test implications of statements in Prof. Yang's paper regarding magnetic thrust forces being approx. 100x greater on the end plates than the side walls.</ref>
+
# Build small end plate out of [http://en.wikipedia.org/wiki/Permeability_%28electromagnetism%29#Values_for_some_common_materials Metglas] or a similar material with high magenetic permeability like cast iron or any ferrite.<ref>[http://forum.nasaspaceflight.com/index.php?topic=37642.msg1381091#msg1381091  Forum post by Flyby] referencing earlier posts. Purpose: to test implications of statements in Prof. Yang's paper regarding magnetic thrust forces being approx. 100x greater on the end plates than the side walls.</ref>
 
# Fill a 24Ghz fustrum with ammonia gas<ref>[http://forum.nasaspaceflight.com/index.php?topic=37642.msg1379801#msg1379801 Forum post by aero], in response to [http://forum.nasaspaceflight.com/index.php?topic=37642.msg1379763#msg1379763 Rodal's explanation of the history of maser development]. Purpose: To produce maser-like amplification inside the fustrum.</ref>
 
# Fill a 24Ghz fustrum with ammonia gas<ref>[http://forum.nasaspaceflight.com/index.php?topic=37642.msg1379801#msg1379801 Forum post by aero], in response to [http://forum.nasaspaceflight.com/index.php?topic=37642.msg1379763#msg1379763 Rodal's explanation of the history of maser development]. Purpose: To produce maser-like amplification inside the fustrum.</ref>
 
== Experimental Measurement Setups ==
 
== Experimental Measurement Setups ==

Revision as of 10:51, 28 May 2015

This page compiles suggestions for as-yet untested variations in experiment designs for EmDrive testing. When possible, links to the original suggestion and a brief description of the justification for this test are provided.

Note: For purposes of this list, the baseline for experimentation is considered to be a copper fustrum with either a magnetron or coaxial RF feed operated at approximately 2.45Ghz, similar to Shawyer's Feasability Study

Design/Shape Modifications

  1. Replace solid endplates with a circular grid design similar to the endplates used by Cullen in his 1950's waveguide experiments, or a mesh as the one used for the glass windows in home-microwave-ovens, having a spacing between mesh or grids small enough such that only wavelengths smaller than that can get through. Purpose: to allow convection through the fustrum, eliminate buoyancy, thermal jet effects, natural thermal convection currents, and other gas effects.
  2. Place ferrite beads in the fustrum, either one large one next to an endplate or a pattern of them along a line in the longitudinal direction.[1]
  3. Separate resonance and attenuation chambers (proposed by WarpTech)

Fustrum Material Variations

  1. Build small end plate out of Metglas or a similar material with high magenetic permeability like cast iron or any ferrite.[2]
  2. Fill a 24Ghz fustrum with ammonia gas[3]

Experimental Measurement Setups

References

  1. Forum post by Rodal summarizing several prior posts. Purpose: to increase attenuation gradient in TE modes, having an axial magnetic field.
  2. Forum post by Flyby referencing earlier posts. Purpose: to test implications of statements in Prof. Yang's paper regarding magnetic thrust forces being approx. 100x greater on the end plates than the side walls.
  3. Forum post by aero, in response to Rodal's explanation of the history of maser development. Purpose: To produce maser-like amplification inside the fustrum.