Why Saab 9-3 Key Replacement Is More Difficult Than You Imagine

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a unique procedure to add a second key. It requires dealer service using a handheld computer dubbed Tech-2. A new key and transponder are required to be purchased and programmed to the car.

It is a good idea to rotate your keys in order that one does not get damaged faster than the other. This will also ensure that your keys remain in good condition.

Replacement Case

The new key fobs are not like the old Saab keys. They're equipped with electronic devices which make it hard to duplicate. This has made stealing cars considerably more difficult than it was years ago. But, it has also made replacing lost keys an incredibly expensive task.

Every owner of a Saab 9-3 must have at a minimum two functioning keys. If one is lost, it is expensive to replace it in the car, as it requires replacing the CIM module and programming the locking cylinders. Dealers usually charge between $100-$200 to do this.

There are ways to reduce these high cost. Certain parts suppliers will utilize the code of an extra key to cut a brand new metal blade for less than that of a dealer. The key, however, must be the same as the original in order to function in your vehicle.

You can also replace the case yourself by following these steps. You'll require a flathead screwdriver and some patience. With the screwdriver you can pull off the plastic and then remove the emergency key. Once you have the case open, remove the electronics and put them in the new case. Place the key with the correct badge inside the case.

Replacement Battery

The Saab 9-3 replacement battery is a cheap part that can be quickly and easily replaced. This video tutorial on DIY from YouTube user Cyclone Cyd explains how to replace the remote key fob battery in just four steps. This guide should work with any modern saab key fob (ud-kultura.ru), though the process may vary slightly.

The first step is to locate the button that releases the backup key within the fob. This is usually located near the Saab logo on the back of the fob. Then you will need an screwdriver with a flat head to insert into the small hole inside this button. This will be enough to allow you to open the case of the fob to allow you to replace the battery.

Once you have installed the new batteries CR1632, you can restore your remote key fob. You can then program it into your car. The whole process should not exceed an hour. This is a simple procedure that doesn't require special tools.

If you lose a key, the procedure will be more complicated however it can be accomplished. The dealer needs to first determine the VIN of the vehicle, and then purchase the replacement TWICE module as well as key blade with the proper unique code. The dealer will then have to program the key using MDI, a brand new software tool.

Replacement Key Fob

The key fob is a device that locks and unlocks your car. It has an internal battery. The batteries last for a certain time and eventually go out of service. It's a common issue that affects all cars. The good news is that you can replace the battery on most key fobs, and not have to replace the entire case. Amazon sells replacement fobs that have all the electronic components installed. It is easy to pop the case open and replace the batteries. It is necessary to remove the emergency key before you replace the batteries. To do this, insert the screwdriver of a small flat head into the slot that is in the middle. Use the screwdriver to move around the case, and it will split open, making it simple to remove.

If you're looking to replace your keys, make sure you have a spare on hand. This will save you a lot of money. If you have spare keys, you can have the dealer cut a new key and program it to your car, which is much cheaper than replacing the entire key fob.

It is possible to add another key to your car even if you don't have one, but it requires lots of research and effort. It costs around a hundred dollars to add an additional car key. The computer in the vehicle also has to be programmed. Professionals can do this however it's a costly option.

Replacement Ignition

In contrast to the earlier saab 9-3 key not accepted contact service automobiles, the current SAAB 9-3 models use a much more sophisticated alarm system that is built around a coded key. If you lose your sole key, it could be costly to purchase a new one because the car must have a special computer added and be programmed to accept a new key. The majority of locksmiths aren't able to do this, and even dealers will charge hundred dollars just to program the new key!

If you've lost your only working key, a dealer will replace the computer in your car (known as the CIM or SAAB TWICE) in order to make an exchange, and they will charge you a premium price for it. We can reprogram the current EEPROM in your car computer so that it is ready for an extra key. This will save you more than 50% on the cost you would have to pay a dealer.

If you've been a faithful owner of an 03-11 SAAB 9-3, you probably realize that the ignition key isn't really all that durable. If your ignition key isn't working correctly, you should look into replacing it. They can become extremely sticky and the buttons have been known to fall off. It's not as difficult as you think to replace the ignition key. With the right tools, it can be accomplished in a matter of minutes.